Units.Temperature

Unlike other modules in elm-units, this module contains two different primary types:

Temperature, which is not actually a Quantity since temperatures don't really act like normal quantities. For example, it doesn't make sense to add two temperatures or find the ratio between them.
Delta, which represents the difference between two temperatures. A Delta is a Quantity since it does make sense to add two deltas to get a net delta, find the ratio between two deltas (one rise in temperature might be twice as much as another rise in temperature), etc.

Since a Temperature value is not a Quantity, this module exposes specialized functions for doing the operations on Temperature values that do make sense, such as comparing two temperatures or sorting a list of temperatures. It's also possible to find the delta from one temperature to another using minus, and then add a Delta to a Temperature using plus.

type alias Temperature =

Temperature

A temperature such as 25 degrees Celsius or 80 degrees Fahrenheit.

type alias Delta =

Delta

A Delta represents the difference between two temperatures.

type alias CelsiusDegrees =

CelsiusDegrees

Tempereature deltas are stored as a number of Celsius degrees.

Temperatures

degreesCelsius : Float -> Temperature

Construct a temperature from a number of degrees Celsius.

inDegreesCelsius : Temperature -> Float

Convert a temperature to a number of degrees Celsius.

degreesFahrenheit : Float -> Temperature

Construct a temperature from a number of degrees Fahrenheit.

inDegreesFahrenheit : Temperature -> Float

Convert a temperature to a number of degrees Fahrenheit.

kelvins : Float -> Temperature

Construct a temperature from a number of kelvins.

Temperature.kelvins 300
--> Temperature.degreesCelsius 26.85

inKelvins : Temperature -> Float

Convert a temperature to a number of kelvins.

Temperature.degreesCelsius 0
    |> Temperature.inKelvins
--> 273.15

absoluteZero : Temperature

Absolute zero, equal to zero kelvins or -273.15 degrees Celsius.

Temperature.absoluteZero
--> Temperature.degreesCelsius -273.15

Deltas

Following the suggestion mentioned here, this module uses (for example) celsiusDegrees to indicate a temperature delta (change in temperature), in contrast to degreesCelsius which indicates an actual temperature.

celsiusDegrees : Float -> Delta

Construct a temperature delta from a number of Celsius degrees.

inCelsiusDegrees : Delta -> Float

Convert a temperature delta to a number of Celsius degrees.

fahrenheitDegrees : Float -> Delta

Construct a temperature delta from a number of Fahrenheit degrees.

Temperature.fahrenheitDegrees 36
--> Temperature.celsiusDegrees 20

inFahrenheitDegrees : Delta -> Float

Convert a temperature delta to a number of Fahrenheit degrees.

Temperature.celsiusDegrees 10
    |> Temperature.inFahrenheitDegrees
--> 18

Constants

Shorthand for Temperature.celsiusDegrees 1 and Temperature.fahrenheitDegrees 1. Can be convenient to use with Quantity.per.

celsiusDegree : Delta

fahrenheitDegree : Delta

Comparison

lessThan : Temperature -> Temperature -> Bool

Check if one temperature is less than another. Note the argument order!

roomTemperature =
    Temperature.degreesCelsius 21


Temperature.degreesFahrenheit 50
    |> Temperature.lessThan roomTemperature
--> True


-- Same as:
Temperature.lessThan roomTemperature
    (Temperature.degreesFahrenheit 50)
--> True

greaterThan : Temperature -> Temperature -> Bool

Check if one temperature is greater than another. Note the argument order!

roomTemperature =
    Temperature.degreesCelsius 21


Temperature.degreesFahrenheit 50
    |> Temperature.greaterThan roomTemperature
--> False


-- Same as:
Temperature.greaterThan roomTemperature
    (Temperature.degreesFahrenheit 50)
--> False

lessThanOrEqualTo : Temperature -> Temperature -> Bool

Check if one temperature is less than or equal to another. Note the argument order!

greaterThanOrEqualTo : Temperature -> Temperature -> Bool

Check if one temperature is greater than or equal to another. Note the argument order!

compare : Temperature -> Temperature -> Order

Compare two temperatures, returning an Order value indicating whether the first is less than, equal to or greater than the second.

Temperature.compare
    (Temperature.degreesCelsius 25)
    (Temperature.degreesFahrenheit 75)
--> GT


Temperature.compare
    (Temperature.degreesCelsius 25)
    (Temperature.degreesFahrenheit 77)
--> EQ

(Note that due to floating-point roundoff, you generally shouldn't rely on temperatures comparing as exactly equal.)

equalWithin : Delta -> Temperature -> Temperature -> Bool

Check if two temperatures are equal within a given delta tolerance. The tolerance must be greater than or equal to zero - if it is negative, then the result will always be false.

Temperature.equalWithin (Temperature.fahrenheitDegrees 1)
    (Temperature.degreesCelsius 25)
    (Temperature.degreesFahrenheit 75)
--> False


Temperature.equalWithin (Temperature.fahrenheitDegrees 3)
    (Temperature.degreesCelsius 25)
    (Temperature.degreesFahrenheit 75)
--> True

min : Temperature -> Temperature -> Temperature

Find the minimum of two temperatures.

Temperature.min
    (Temperature.degreesCelsius 25)
    (Temperature.degreesFahrenheit 75)
--> Temperature.degreesFahrenheit 75

max : Temperature -> Temperature -> Temperature

Find the maximum of two temperatures.

Temperature.max
    (Temperature.degreesCelsius 25)
    (Temperature.degreesFahrenheit 75)
--> Temperature.degreesCelsius 25

Arithmetic

plus : Delta -> Temperature -> Temperature

Add a Delta to a Temperature to get a new Temperature.

Temperature.degreesCelsius 25
    |> Temperature.plus
        (Temperature.celsiusDegrees 7)
--> Temperature.degreesCelsius 32

If you want to subtract a Delta from a Temperature, you can negate the delta first and then call plus.

minus : Temperature -> Temperature -> Delta

Subtract one Temperature from another to get a Delta. Note the argument order!

-- 25 degrees Celsius is 77 degrees Fahrenheit
start =
    Temperature.degreesCelsius 25


end =
    Temperature.degreesFahrenheit 80


end |> Temperature.minus start
--> Temperature.fahrenheitDegrees 3


start |> Temperature.minus end
--> Temperature.fahrenheitDegrees -3

clamp : Temperature -> Temperature -> Temperature -> Temperature

Given a lower and upper bound, clamp a given temperature to within those bounds. Say you wanted to clamp a temperature to be between 18 and 22 degrees Celsius:

lowerBound =
    Temperature.degreesCelsius 18


upperBound =
    Temperature.degreesCelsius 22


Temperature.degreesCelsius 25
    |> Temperature.clamp lowerBound upperBound
--> Temperature.degreesCelsius 22


Temperature.degreesFahrenheit 67 -- approx 19.4 °C
    |> Temperature.clamp lowerBound upperBound
--> Temperature.degreesFahrenheit 67


Temperature.absoluteZero
    |> Temperature.clamp lowerBound upperBound
--> Temperature.degreesCelsius 18

List functions

minimum : List Temperature -> Maybe Temperature

Find the minimum of a list of temperatures. Returns Nothing if the list is empty.

Temperature.minimum
    [ Temperature.degreesCelsius 20
    , Temperature.kelvins 300
    , Temperature.degreesFahrenheit 74
    ]
--> Just (Temperature.degreesCelsius 20)

maximum : List Temperature -> Maybe Temperature

Find the maximum of a list of temperatures. Returns Nothing if the list is empty.

Temperature.maximum
    [ Temperature.degreesCelsius 20
    , Temperature.kelvins 300
    , Temperature.degreesFahrenheit 74
    ]
--> Just (Temperature.kelvins 300)

sort : List Temperature -> List Temperature

Sort a list of temperatures from lowest to highest.

Temperature.sort
    [ Temperature.degreesCelsius 20
    , Temperature.kelvins 300
    , Temperature.degreesFahrenheit 74
    ]
--> [ Temperature.degreesCelsius 20
--> , Temperature.degreesFahrenheit 74
--> , Temperature.kelvins 300
--> ]

sortBy : (a -> Temperature) -> List a -> List a

Sort an arbitrary list of values by a derived Temperature. If you had

rooms =
    [ ( "Lobby", Temperature.degreesCelsius 21 )
    , ( "Locker room", Temperature.degreesCelsius 17 )
    , ( "Rink", Temperature.degreesCelsius -4 )
    , ( "Sauna", Temperature.degreesCelsius 82 )
    ]

then you could sort by temperature with

Temperature.sortBy Tuple.second rooms
--> [ ( "Rink", Temperature.degreesCelsius -4 )
--> , ( "Locker room", Temperature.degreesCelsius 17 )
--> , ( "Lobby", Temperature.degreesCelsius 21 )
--> , ( "Sauna", Temperature.degreesCelsius 82 )
--> ]

ianmackenzie/elm-units-prefixed/2.8.0