The authorization code grant type is used to obtain both access tokens and refresh tokens and is optimized for confidential clients. Since this is a redirection-based flow, the client must be capable of interacting with the resource owner's user-agent (typically a web browser) and capable of receiving incoming requests (via redirection) from the authorization server.
+---------+ +--------+
| |---(A)- Auth Redirection ------>| |
| | | Auth |
| Browser | | Server |
| | | |
| |<--(B)- Redirection Callback ---| |
+---------+ (w/ Auth Code) +--------+
^ | ^ |
| | | |
(A) (B) | |
| | | |
| v | |
+---------+ | |
| |----(C)---- Auth Code ------------+ |
| Elm App | |
| | |
| |<---(D)------ Access Token ------------+
+---------+ (w/ Optional Refresh Token)(A) The client initiates the flow by directing the resource owner's user-agent to the authorization endpoint.
(B) Assuming the resource owner grants access, the authorization server redirects the user-agent back to the client including an authorization code and any local state provided by the client earlier.
(C) The client requests an access token from the authorization server's token endpoint by including the authorization code received in the previous step.
(D) The authorization server authenticates the client and validates the authorization code. If valid, the authorization server responds back with an access token and, optionally, a refresh token.
After those steps, the client owns a Token that can be used to authorize any subsequent
request.
Request configuration for an authorization (Authorization Code & Implicit flows)
clientId (REQUIRED): The client identifier issues by the authorization server via an off-band mechanism.
url (REQUIRED): The authorization endpoint to contact the authorization server.
redirectUri (OPTIONAL): After completing its interaction with the resource owner, the authorization server directs the resource owner's user-agent back to the client via this URL. May be already defined on the authorization server itself.
scope (OPTIONAL): The scope of the access request.
state (RECOMMENDED): An opaque value used by the client to maintain state between the request and callback. The authorization server includes this value when redirecting the user-agent back to the client. The parameter SHOULD be used for preventing cross-site request forgery.
Parse the location looking for a parameters set by the resource provider server after redirecting the resource owner (user).
Returns AuthorizationResult Empty when there's nothing
Describes errors coming from attempting to parse a url after an OAuth redirection
Describes an OAuth error as a result of an authorization request failure
error (REQUIRED): A single ASCII error code.
errorDescription (OPTIONAL)
Human-readable ASCII text providing additional information, used to assist the client developer in
understanding the error that occurred. Values for the errorDescription parameter MUST NOT
include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
errorUri (OPTIONAL):
A URI identifying a human-readable web page with information about the error, used to
provide the client developer with additional information about the error. Values for the
errorUri parameter MUST conform to the URI-reference syntax and thus MUST NOT include
characters outside the set %x21 / %x23-5B / %x5D-7E.
state (REQUIRED if state was present in the authorization request):
The exact value received from the client
The response obtained as a result of an authorization
code (REQUIRED): The authorization code generated by the authorization server. The authorization code MUST expire shortly after it is issued to mitigate the risk of leaks. A maximum authorization code lifetime of 10 minutes is RECOMMENDED. The client MUST NOT use the authorization code more than once. If an authorization code is used more than once, the authorization server MUST deny the request and SHOULD revoke (when possible) all tokens previously issued based on that authorization code. The authorization code is bound to the client identifier and redirection URI.
state (REQUIRED if state was present in the authorization request):
The exact value received from the client
A simple type alias to ease readability of type signatures
Builds a the request components required to get a token from an authorization code
let req : Http.Request AuthenticationSuccess
req = makeTokenRequest toMsg authentication |> Http.requestRequest configuration for an AuthorizationCode authentication
credentials (REQUIRED): Only the clientId is required. Specify a secret if a Basic OAuth is required by the resource provider.
code (REQUIRED): Authorization code from the authorization result
url (REQUIRED): Token endpoint of the resource provider
redirectUri (REQUIRED): Redirect Uri to your webserver used in the authorization step, provided here for verification.
Describes at least a clientId and if define, a complete set of credentials
with the secret. The secret is so-to-speak optional and depends on whether the
authorization server you interact with requires a 'Basic' authentication on top of
the authentication request. Provides it if you need to do so.
{ clientId = "<my-client-id>"
, secret = Just "<my-client-secret>"
}The response obtained as a result of an authentication (implicit or not)
token (REQUIRED): The access token issued by the authorization server.
refreshToken (OPTIONAL): The refresh token, which can be used to obtain new access tokens using the same authorization grant as described in Section 6.
expiresIn (RECOMMENDED): The lifetime in seconds of the access token. For example, the value "3600" denotes that the access token will expire in one hour from the time the response was generated. If omitted, the authorization server SHOULD provide the expiration time via other means or document the default value.
scope (OPTIONAL, if identical to the scope requested; otherwise, REQUIRED): The scope of the access token as described by Section 3.3.
Describes an OAuth error as a result of a request failure
error (REQUIRED): A single ASCII error code.
errorDescription (OPTIONAL)
Human-readable ASCII text providing additional information, used to assist the client developer in
understanding the error that occurred. Values for the errorDescription parameter MUST NOT
include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
errorUri (OPTIONAL):
A URI identifying a human-readable web page with information about the error, used to
provide the client developer with additional information about the error. Values for the
errorUri parameter MUST conform to the URI-reference syntax and thus MUST NOT include
characters outside the set %x21 / %x23-5B / %x5D-7E.
Parts required to build a request. This record is given to Http.request in order
to create a new request and may be adjusted at will.
Json decoder for a positive response. You may provide a custom response decoder using other decoders from this module, or some of your own craft.
defaultAuthenticationSuccessDecoder : Decoder AuthenticationSuccess
defaultAuthenticationSuccessDecoder =
D.map4 AuthenticationSuccess
tokenDecoder
refreshTokenDecoder
expiresInDecoder
scopeDecoderJson decoder for an errored response.
case res of
Err (Http.BadStatus { body }) ->
case Json.decodeString OAuth.AuthorizationCode.defaultAuthenticationErrorDecoder body of
Ok { error, errorDescription } ->
doSomething
_ ->
parserFailed
_ ->
someOtherErrorLike 'makeAuthorizationUrl', but gives you the ability to specify a custom response type and extra fields to be set on the query.
makeAuthorizationUrl : Authorization -> Url
makeAuthorizationUrl =
makeAuthorizationUrlWith Code Dict.emptyFor example, to interact with a service implementing OpenID+Connect you may require a different
token type and an extra query parameter as such:
makeAuthorizationUrlWith
(CustomResponse "code+id_token")
(Dict.fromList [ ( "resource", "001" ) ])
authorizationA parameterized 'AuthorizationResult'. See 'parseCodeWith'.
Like 'makeTokenRequest', but gives you the ability to specify custom grant type and extra fields to be set on the query.
makeTokenRequest : (Result Http.Error AuthenticationSuccess -> msg) -> Authentication -> RequestParts msg
makeTokenRequest =
makeTokenRequestWith
AuthorizationCode
defaultAuthenticationSuccessDecoder
Dict.emptyJson decoder for an 'expire' timestamp
Json decoder for a 'scope'
Json decoder for a 'scope', allowing comma- or space-separated scopes
Json decoder for an 'access_token'
Json decoder for a 'refresh_token'
Json decoder for 'error' field
Json decoder for 'error_description' field
Json decoder for 'error_uri' field
Like parseCode, but gives you the ability to provide your own custom parsers.
parseCode : Url -> AuthorizationResultWith AuthorizationError AuthorizationSuccess
parseCode =
parseCodeWith defaultParsersParsers used in the 'parseCode' function.
ErrorCodetokenParser succeeded to parse the remaining partserrorParser succeeded to parse the remaining partsDefault parsers according to RFC-6749
Default 'code' parser according to RFC-6749
Default 'error' parser according to RFC-6749
Default response success parser according to RFC-6749
Default response error parser according to RFC-6749
Redirects the resource owner (user) to the resource provider server using the specified authorization flow.